Teac LP-P1000 - Manuel (Page 55)

55
EN
G
LI
SH
The unit can be set to enter standby after a specified
amount of time.
Setting the sleep timer
Press the SLEEP button repeatedly until the desired set-
ting appears on the display.
The settings for the time until the unit enters standby
change as follows (shown in minutes).
90 75 60 45 30 15
Off
When the sleep timer is active, the SLEEP indicator
appears at the bottom right of the display.
o The display is dimmed when the sleep timer is active.
o When the sleep timer is active, press the SLEEP but-
ton once to show for a few seconds the amount of
time until the unit enters standby.
o When the sleep timer is operating, you can press the
SLEEP button twice to turn the sleep timer off.
Sleep timer
Turn the wakeup timer on and off when the unit is in
standby mode.
Turning the timer off
When you do not want to use the wakeup timer, press
the TIMER button to turn it off.
“TIMER OFF” scrolls across the display and the timer
indicator disappears from the display.
o You can turn the timer off whether the unit is on or in
standby.
Turning the timer on
To use the wakeup timer, press the TIMER button again.
“TIMER ON” scrolls across the display followed by the
timer settings in the following order: TIMER ON time,
TIMER OFF time, playback source and volume. The timer
indicator also appears on the display, showing that the
unit is waiting for the TIMER ON time.
o During timer playback, press the TIMER button to
disable the timer. In this case, the unit will not enter
standby mode (turn off ) automatically when the
TIMER OFF time is reached.
o The timer cannot be turned on unless the unit is in
standby mode.