Teac LP-P1000 - Manuel (Page 15)

15
EN
G
LI
SH
C Analog audio input and output jacks
(AUX1 IN/LINE OUT)
These input and output analog audio signals.
Use commercially available audio cables to connect
other equipment to the input and output jacks of
this unit.
White (L)
Red (R) White (L)
Red (R)
o To connect and use a cassette deck, CD recorder
or other recording device, connect that device’s
output jacks to this unit’s AUX 1 IN jacks, and that
device’s input jacks to this unit’s LINE OUT jacks.
o Insert the plugs completely. Do not bundle these
cords with power cords or speaker cables. Doing
so could reduce the audio quality or cause noise.
There are analog audio input jacks on both the front
and rear panels.
If cables are connected to both the front panel
(AUX 2 IN) and the rear panel (AUX 1 IN) jacks, the
audio input through the front panel jack (AUX 2 IN)
will be used. If nothing is connected to the front
panel jack (AUX 2 IN), the audio input through the
rear panel jack (AUX 1 IN) will be used.
D AC power cord
Confirm that the power plug is plugged into a
working outlet.
V Be sure to connect the power cord to an
AC outlet that supplies the correct voltage.
Connection to an outlet that supplies incor-
rect voltage could cause fire or electric shock.
Hold the power plug when plugging it into an
outlet or unplugging it. Never pull or yank on
the power cord. Unplug the power cord from
the outlet when you are not planning to use
the unit for an extended period of time.