Motion detector setting (motion det) – Panasonic WV-CS554 Manuel d'utilisation

Page 42

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

1. Display SET UP on the monitor screen,

(Refer to Setup Menu Display on page 16 for details on display­

ing the SET UP menu on the monitor screen.)

2. Move the cursor to MOTION DET and select ON or OFF by using

the joystick. Then press the CAM (SET) key when you select ON.

3. When you select ON, the motion detect setup menu appears.

You can mask the areas in this menu.

4. Move the cursor to MASK SET and press the CAM (SET) key.

48 mask areas appear on the monitor screen.

Refer to the Light Control Setting section on page 36 for masking

operations.

5. After masking areas, press the MON (ESC) key. The motion

detect setup menu appear on the monitor screen.

9. Motion Detector Setting (MOTION DET)

Camera setting menu

** SET UP •*

CAMERA ID

OPT •»

ALC/MAHDAL

AIiC

SHUTTER

OFF

AOC

OH (MID)

SENS UP

X2 AUTO

SYNC

INT

WHITE BAL

ATW Ч

MOTION DET

OM ^

ЛР MODE

MANUAL H

RET SPECIAL2 '«

Motion detect menu

** МОТЮЫ DETECT •*

LEVZL

+

DISPLAY MODE

AIARH

OFF

MASK SET

RECOVER TIME

IHIH

RET

6. Move the cursor to ALARM and select ON or OFF by using the

joystick.

ON: The alarm signal is supplied while the DISPLAY MODE is

activated.

OFF: The alarm signal is not supplied while the DISPLAY MODE

is activated.

7. Move the cursor to DISPLAY MODE.

Press the CAM (SET) key to see the present setting. The areas

that detect the motions start blinking,

8. Move the cursor to LEVEL by using the joystick.

Use the joystick to obtain the optimum detection level. The "I"

cursor moves to the right or left.

Note: Repeat the above procedures until you obtain the desired

adjustment.

9. Move the cursor to RECOVER TIME by using the joystick.

You can select the following recover times.

c

OFF*—1MIN-^2MIN

—3MIN—-5MIN

60MIN*-*30MIN*—20MIN*—10MIN

'Г]

10. Move the cursor to RET and press the CAM (SET) key to return to

SET UP.

42

Advertising
Ce manuel est liée aux produits suivants: