Panasonic WV-CS554 - Manuel (Page 36)

The positioning of the CAMERA ID stops at the edges of the
screen.
The CAMERA ID moves faster when the joystick is kept to the
right or left for one second or more.
To return to SET UP for setting other items, move the cursor to
RET, and press the CAM (SET) key.
CAMERA ID ----
0123456789
abcdefghijklm
NOPQRSTUVWXYZ
( ) . , ' " t J t # ! i =
SPACE
POSI RET RESET
CAHl.
t
CAMERA ID ----
0123456789
ABCDEPSHIJEDH
NOPQRSTUVWXYZ
(i
SPACE
POSI RET RESET
CAHl.
t
3. Light Control Setting (ALC/MANUAL)
1. Display SET UP on the monitor screen.
If necessary, refer to Setup Menu Display on page 16 for details
on displaying the SET UP on the monitor screen.
2. Move the cursor to ALC/MANUAL and select ALC or MANUAL by
using the joystick. When you select ALC, set backlight compen­
sation.
Note: The backlight compensation submenu associated with this
menu is described separately and should be set up after
installing the camera at the site and observing the actual site
picture,
3. When MANUAL is selected, quit the setup menu by pressing
MON (ESC) key. Press OPEN or CLOSE key on the controller for
iris adjustments.
Camera setting menu
SET DP **
CAMERA ID OFF 't
ALC/MANUAL ALC
SHUTTER OFF
AGC OH(HID)
SENS UP X3 AUTO
SYNC INT
WHITE BAL ATW ■*
MOTION DET OFF
AP MODE MANUAL M
RET 8 PEC I AL 3 '1
(1) ALC Mode with SUPER-D2 ON
1. Press the CAM (SET) key after selecting ALC. The ALC CONT
menu appears.
2. Move the cursor to the SUPER-D2 parameter and select ON.
3. If you want to adjust the video output level, move the cursor to the
"I" position. Adjust to the desired level by using the joystick.
4. Move the cursor to RET and press the CAM (SET) key to return to
the CAM SET UP menu. (To return to the camera picture, press
the F4 button.)
Backlight compensation menu
** ALC CONT **
BACK LIGHT COMP
SUPER-D2 OFF)
MASK SET
LEVZL
- +
RET
•* AliC CONT **
BACK LIGHT COMP
36