Pan offset, To set the lens zoom and focus positions – Panasonic WV-CS554 Manuel d'utilisation

Page 18

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

3. Pan Offset

If the camera is replaced with a new one, Pan Offset is used to

adjust its positions to be the same as before except patrol setting.

The controller can be downloaded or uploaded the camera preset

position data.

Caution: The preset data for conventional camera (WV-CS654 for

example) is incompatible with WV-CS854A’s, WV-CS854A’s

preset data will be destroyed if you upload the conventional

data. When this happened, prepare a WV-CS854A having the

initial factory settings. Download the factory settings into the

controller and then upload to the camera whose data is

destroyed.

(1) Display the PRESET NUMBER SET menu.

(2) Select a position number for the picture to be most enlarged

among the numbers by moving the joystick. Then press the

CAM (SET) key. POSITION setting menu appears.

(3) Move the cursor to PAN OFFSET SET and select the right or

left arrow by moving the joystick.

(4) Press the CAM (SET) key until the desired offset value in

degree appears.

(5) Move the cursor to other than PAN OFFSET, then press the

MON (ESC) key.

Notes:

• Further adjustment of the other positions is unnecessary. This

adjustment applies to all other positions.

• Make sure to move the cursor before pressing the key in step

5. Otherwise the settings will be ignored.

• Retry when the camera fails to upload or download the data.

4. To Set the Lens Zoom and Focus Positions

(1) Move the cursor to PUSH SET next to ZOOM/FOCUS and

press the CAM (SET) key. The ZOOM/FOCUS setting menu

appears.

(2) Select a zoom position by moving the zoom control up and

down, and a focus position by moving the focus control up

and down, and then press the CAM (SET) key.

The positions are set and the screen returns to the position

setting menu.

Notes:

• When the camera is used at a nearly horizontal angle, the

focus may not be adjustable to a high level of accuracy.

• If you move the cursor to POSITION number and move the

joystick right or left, the position number can be selected.

The selected preset position number can also be set after

pressing the CAM (SET) key.

• The preset and camera IDs appear at the tower-left corner of

the position setting menu after setting them.

5. Move the cursor to RET and press the CAM (SET) key to return to

the preset setting menu.

PRESET NUMBER SET menu

(1-32)

•* PRESET HUMBER

SET ••

i;

3

3

4

5

6

7

8

9 10

11

12

13 14

15

16

17 16

19

20

ai

22

23

24

35 26

27

28

29 3Q

31

32

ID:DOOR

33-64 RET

Position setting menu

*• POSITION 1 * «

PAN/TILT

^PUSR

SET

ZOOM/FOCUS

-^PUSH SET

PAN OFFSET

SET H

-0.0 -»

RET
FLOORl
DOOR

Position setting menu

•• POSITION 1 **

PAN/TILT

-»PUSH SET

ZOOM/FOCUS

B

pushiset

,

PAH OFFSET

SET i-

-0.0 -f

RBT
FLOORl
DOOR

ZOOM/FOCUS setting menu

** POSITION 1 **

PAN/TILT

-iPOSH SET

ZOOH/FOCDS

-»PUSH SET

U.ZOOM^D/L^TOCUS R

PAH OFFSET SET 4-

-0.0

RET
FLOORl
DOOR

Position setting menu

•• POSITION 1 **

PAN/TILT

-»PUSH SET

ZOOM/FOCUS

^PUSH SET

PAN OFFSET

SET »- -0.0 ->

RET

FLOORl
DOOR

18

Advertising
Ce manuel est liée aux produits suivants: