Sony TCD-D8 - Manuel (Page 27)

Operating with the AC Power Adaptor or
Car Battery
AC power adaptor
■o
O
5
a >
"t
to
O
c
—T
n
n>
Tips
• When the AC power
adaptor or the car
battery cord is
connected to the DC IN
6V jack of the tape-
corder, the internal
batteries are —
automatically
disconnected. I’ower is
automatically supplied
from the external
power source. Tire
tape-corder works with
the external power
source, not the internal
batteries.
• When the AC power
plug or the car battery
cord is used for an
extended period of
time, the internal
temperature of the
tape-corder may rise.
This is not a
malfunction.
Using the AC power adaptor
Connect the supplied AC power adaptor to the DC IN
6V jack.
Notes on the AC power adaptor
• Use only the supplied AC power adaptor or the
optional AC-E60HG/ AC-E60AM AC power
adaptor. Do not use any other AC power adaptor.
Polarity of the plug
• Make sure that the cassette compartment lid is
closed before disconnecting the AC power adaptor
or removing the batteries. Otherwise, the cassette
compartment lid may not dose if the power source
is ciisconnected or removed while the cassette
compartment lid is open. In this case, connect the
power aefaptor or insert the batteries again.
Using the car battery
To operate the tape-corder with the car battery,
connect the car battery cord Sony DCC-E260XL or
DCC-E160L, DCC-E260HG (not supplied) to the DC
IN 6V jack of the tape-corder. For more details, refer
to its Operating Instructions manual.
Power Sources 27'