To line in, Connecting with other equipment for playback – Sony TCD-D8 Manuel d'utilisation
Page 23
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Connecting with Other Equipment for
Playback
You can connect the tape-corder to other analog audio equipment and audio
equipment with digital output. Refer to page 12 for "Playing Back".
► Playback
Tip
The output level of the
PHONES/LINE OUT jack
and the REMOTE
DIGITAL I/O jack is
fixed. The volume cannot
be adjusted with the
VOLUME buttons of this
tape-corder.
Note
When a plug is connected
to the PHONES/LINE
OUT jack, the tape-corder
cannot change the output
mode from LINE OUT to
PHONES (AVLS) during
playback although you
can set the PHONES
(AVLSl/LINE OUT
switch to PHONES
(AVLS), vice versa.
Playback with an analog audio equipment
(Analog connection)
Audio connecting cable
(not supplied)
Stereo unit
or radio
cassette
recorder, etc.
su
'<
a-
su
r>
7T
2
PHONES/LINE OUT
To LINE IN
1 Set the PHONES (AVLS)/LINE OUT switch to
LINE OUT.
2
Begin playback and adjust the volume of the
connected equipment.
Playback with an audio equipment with
digital input (Digital connection)
Optical cable
(not supplied)
To REMOTE DIGITAL I/O
DAT deck,
digital
amplifier,
etc.
Connect the digital audio equipment to this tape-
corder as shown. Begin playback and adjust the
volume of the connected equipment.
Playback 23^'