Sony TCD-D8 - Manuel (Page 15)

Kecording
Connecting with Other Equipment for
Recording
You can connect the tape-corder to other analog audio equipment and audio
equipment with digital output. Refer to page 8 for "Recording",
Note
When recording from
analog audio equipment,
disconnect the
microphone from the
tape-corder. .
Otherwise, the sound
from the microphone is
recorded.
Notes_____
is displayed, the source
cannot be recorded.
(See page 30.)
• Make sure to set the
switch of the
connecting cable to
DlGITALbefore
recording.The input
remains as analog input
even if the switcli is set
to DIGITAL while
recording.
Tips
When connecting with an
audio equipment with
digital output, note the
followings:
• Setting of the recording
mode is not required.
• The recording level is
set automatically to the
level of the source. It is
impossible to adjust it
with this tape-corder
manually.
Recording from analog audio equipment
(Analog connection)
Audio connecting cable
(not supplied)
30
fl) n
O
3
(O
To LINE IN
To LINE OUT
2
3
Select the recording mode and sampling
frequency.
Press the REC and PAUSE I I buttons.
Press either the PLAY ► or PAUSE I I button to
begin recording. Then, begin playback of the
connected source.
Recording from audio equipment with digital
output (Digital connection)
Optical cable
(not supplied)
Switch
To (OPTICAL)
digital output
To REMOTE
DIGITAL I/O
CD player,
BS tuner,
DAT deck,
etc.
To (COAXIAL)
digital output
Coaxial cable
(not supplied)
1
Use and connect the optical cable or coaxial cable
according to the digital output jack of the
connected equipment.
2
Set the switch of the connecting cable to DIGITAL.
3
Press the REC and PAUSE II buttons.
4
Press either the PLAY ►- or PAUSE I I button to
begin recording. Then, begin playback of the
connected source.
Recording 1 5 " '