Sony MDS-JB930 - Manuel (Page 56)

Specifications
>
a
a
J* o’
3
a
0
3
0)
o'
3
System
Disc
Laser
Laser output
Laser diode
Revolutions (CLV)
Error correction
Sampling frequency
Coding
Modulation system
Number of channels
Frequency response
Signal-to-noise ratio
Wow and flutter
Inputs
LINE (ANALOG) IN
DIGITAL OPTICAL INI
DIGITAL OPTICAL IN2
DIGITAL COAXIAL IN
MiniDisc digital audio system
MiniDisc
Semiconductor laser { X = 780 nm)
Emission duration: continuous
Less than 44.6 pW*
* This output is the value measured
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Material: GaAlAs
400 rpm to 900 rpm
ACIRC (Advanced Cross Interleave
Reed Solomon Code)
44.1 kHz
ATRAC (Adaptive TRansform
Acoustic Coding)
EFM (Eight-to-Fourteen Modulation)
2 stereo channels
5 to 20,000 Hz ±0.3 dB
Over 100 dB during playback
Below measurable limit
Jack type: phono
Impedance: 47 kilohms
Rated input: 500 mVrms
Minimum input: 125 mVrms
Connector type: square optical
Impedance: 660 nm (optical wave
length)
Cormector type: square optical
Impedance: 660 nm (optical wave
length)
Jack type: phono
Impedance: 75 ohms
Rated input: 0.5 Vp-p, ±20%
Outputs
PHONES
LINE (ANALOG) OUT
DIGITAL OPTICAL OUT
DIGITAL COAXIAL OUT
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Jack type: stereo phone
Rated output: 28 mW
Load impedance: 32 ohms
Jack type: phono
Rated output: 2 Vrms (at 50 kilohms)
Load impedance: over 10 kilohms
Connector type: square optical
Rated output: -18 dBm
Load impedance: 660 nm (optical
wave length)
Jack type: phono
Rated output: 0.5 Vp-p (at 75 ohms)
Load impedance: 75 ohms
120 V AC, 60 Hz
18W
430 X n o X 287 mm (17 x 4 Vs x
11 ^/s in.) (w/h/d) incl. projecting
parts and controls
5.2 kg (11 lbs 7 oz)
Supplied accessories
See page 4.
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
Design and specifications are subject to change without notice.
5 6 ^