Sony MDS-JB930 - Manuel (Page 31)

Changing the contents of the program
While the deck is stopped and "PRCIGRAM" lights up, do
steps 1 and 2 of "Programing the tracks" on page 30,
followed by one of the procedures below:
To Do the following:
Erase a track Press -#</►► repeatedly until the
number of the unwanted track flashes,
then press CLEAR.
Erase all tracks Press CLEAR repeatedly until all the track
numbers disappear.
Add a track at the
beginning of the
program Press repeatedly until "0" flashes
before the first track number, then do steps
3 to 5 of "Programing the tracks" on page
30.
Add a track in the
middle of the
program Press repeatedly until the track
number which will precede the new track
flashes. Press AMS to display flashing
"0, " then do steps 3 to 5 of "Programing
the tracks" on page 30.
Add a track to the
end of the
program
Press ►► repeatedly until "0" flashes after
the last track number, then do steps 3 to 5
of "Programing the tracks" on page 30.
Replace a track Press repeatedly until the
number of the track to be changed flashes,
then do steps 3 to 5 of "Programing the
tracks" on page 30.
Tips for Recording From
MDs to Tape
MENU/NO AMS YES
Inserting blanks between tracks during
play (Auto Space)
The MD deck can be set to automatically insert a three-
second blank between tracks during play. This function is
useful when you're recording from an MD to an analog
tape since the three-second blank enables you to use the
Multi-AMS function later to locate the beginning of tracks
on the tape.
1 While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Turn AMS until "Auto Off" appears, then press
AMS or YES.
0)
<<
5‘
(Q
s
o
ui
3
Turn AMS to select the setting, then press
YES.
AMS or
To Select
Turn on Auto Space Auto Space
Turn off Auto Space Auto Off (factory setting)
4
Press MENU/NO.
i* You can use the remote to turn Auto Space on or off U
While the deck is stopped, press A.SPACE repeatedly until "Auto
Space" or "Auto Off'appears in the display.
Notes
• If you select "Auto Space" and record a selection containing
multiple track numbers (for example, a medley or symphony),
blank spaces will be created on the tape in between the various
sections.
• If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting ("Auto Space" or "Auto Off")
and recall it the next time vou turn on the deck.
3 V