Sony MDS-JB930 - Manuel (Page 26)

Playing MDs
Playing an MD
This chapter explains the various
ways to play MDs. The operations for normal plav are explained below.
I/Cl) AMS
1 Turn on the amplifier and select MD on the
amplifier.
2 Press l/Cl) to turn on the deck.
The STANDBY indicator turns off.
3 Insert an MD.
4 If necessary, turn AMS clockwise (or press
repeatedly) to locate the track you want to start
playing from.
If you want to play from the first track, go to step 5.
5 Press O.
The deck starts to play.
6 Adjust the volume on the amplifier.
Operations you may want to do during play
To Press or turn
Stop play ■
Pause play II
Resume play after pausing Oorll
Locate a succeeding track AMS clockwise (or press
repeatedly)
Locate the beginning of the
current track or a preceding
track AMS counterclockwise (or press
K4 repeatedly)
Eject the MD EJECT = after stopping play
Adjust the analog output
level*' (between -20.0 dB and
0.0 dB) T REC LEVEL/ANALOG OUT
LEVEL +/- repeatedly
* When you eject the MD or turn off the deck, the output level is reset
to the factory setting (0.0 dB).
C* To use headphones
Connect them to PHONES jack. Turn PHONE LEVEL (or press
REC LEVEL/ANALOG OUT LEVEL +/- repeatedly) to adjust
the volume.
2 6 ^