Pausing after each track (auto pause), 1 while the deck is stopped, press menu/no twice, 4 press menu/no – Sony MDS-JB930 Manuel d'utilisation
Page 32: To resume play after pausing
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Tips for Recording From MDs to Tape
01
•<
s'
Ifi
S
o
(A
Pausing after each track (Auto Pause)
You can set the MD deck so that it pauses after each track
to give you time to locate the next track to be recorded.
1
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Turn AMS until "Auto Off" appears, then press
AMS or YES.
3
Turn AMS to select the setting, then press AMS or
YES.
To
Select
Turn on Auto Pause
Auto Pause
Turn off Auto Pause
Auto Off (factory setting)
4
Press MENU/NO.
To resume play after pausing
Press t>.
Q You can use the remote to turn Auto Pause on or off Jj
While the deck is stopped, press A.SPACE repeatedly until "Auto
Pause" or "Auto Off" appears in the display.
Note
If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting ("Auto Pause" or "Auto Off") and
recall it the next time you turn on the deck.
32‘