Sony MDS-JB930 - Manuel (Page 36)

Erasing Tracks
Dividing Tracks
3
«0
X
ID
n
0
S.
ID
a
S
o
v>
Repeat step 4 until you've located point A.
6 Press AMS or YES to enter point A.
"Point B set" appears and sex'eral seconds of the track
from point A play back repeatedly.
7
Continue playing the track or press ►► to locate
the ending point of the portion to be erased (point
B), then press AMS or YES.
"A-B Ers" and "Point B ok?" alternate in the display
and a few seconds of the track before point A and after
point B play back repeatedly.
8 Repeat step 4 until you've located point B.
9
Press AMS or YES to enter point B.
"Complete!!" appears for a few seconds and the
portion between point A and B is erased.
To cancel the operation
Press MENU/NO or ■.
Q You can undo the erasure
For details, see "Undoing the Last Edit" on page 42.
Note
In the following cases, "Impossible" appears and you can't erase
a portion of a track:
• The point B you entered comes before point A.
• After repeated editing of a track, it may become impossible to
erase a portion of the track any further. This is a technical
limitation of the MD system and is not a mechanical error.
You can di\ ide a recorded track at any point simply by
adding a track mark at that point. This is especially useful
vs'hen you want to dicitie recorded material which
contains multiple tracks but only one track number (see
page 23), or when you want to locate a certain point in the
track.
Example: Dividing the second track
pT| AAA
Q] AAA
niBB-
•
’B1 B2
i“BBB
■B1 ’ B2
acce
acce
When you di\ide a track, the total number of tracks
increases by one and all tracks following the divided track
are automatically renumbered.
Dividing a track after selecting the track
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display
Turn AMS (or press repeatedly) until
"Divide ?" appears, then press AMS or YES.
Turn AMS (or press /►►! repeatedly) until the
number of the track you want to divide appears,
then press AMS or YES.
"-Rehearsal-" appears and the track starts to play.
..While monitoring the sound, turn AMS (or press
(◄◄/►►I repeatedly) to locate the dividing point.
The time indication ("m," "s ," and "f ") of the current
point is displayed and several seconds of the track
from that point play back repeatedly
To find a point quickly
Specify a unit (minute, second, or frame) by which the
MD is advanced when you turn AMS (or press /
►►I repeatedly).
To do this, press in step 4 repeatedly to select
"m," "s or " f . " The selected unit flashes in the
display.
36^