Sony CMT-M11C - Manuel (Page 46)

Active speaker system (SA-N11)
Speaker system
Speaker units
Rated impedance
For the U.S. model
2-way bass reflex
(magnetically shielded
design)
10 cm dia., cone type
2 cm dia., balance drive
type
4 ohms
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 4 ohm loads both
channels driven, from 60-
20,000 Hz; rated 10 watts
per channel minimum
RMS power, with no
more than 0.9 % total
harmonic distortion from
10 watts to rated output.
Except for the U.S. model
Continuous RMS*power output
12 + 12 watts
Power requirements
North American model
Other models
Power consumption
Dimensions
Mass
(4 ohms at 1 kHz, 5 %
THD)
13 + 13 watts
(4 ohms at 1 kHz, 10 %
THD)
120 VAC, 60 Hz
120 V, 220 or 240 V AC,
50/60 Hz adjustable with
voltage selector
25 W
Right: Approx. 125 x 205
X 212 mm (w/h/d)
(5 X 8 Vy X 7 Vy inches)
inch projecting parts and
controls
Left: Approx. 125 x 205 x
198 mm (w/h/d)
(5 X 8 Vy X 7 ^/j^ inches)
ind. projecting parts and
controls
Right: Approx. 3.0 kg
(6 lb 10 oz)
Left: Approx. 1.8 kg (31b
15 oz)
Supplied accessories
Sony RM-SMll Remote
( 1 )
Sony SUM-3 (NS)
batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Speaker cable (1)
Audio cord Im (1)
Digital optical cable (1)
Power adaptor (1)
(Singaporian model only)
Design and specifications are subject to change
without notice.
47
^