3 press yes to complete the labeling procedure, To cancel labeling, To erase a disc name – Sony CMT-M11C Manuel d'utilisation
Page 19: Mote
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Press CURSOR —*■ on the MD deck
(or ►► forMD on the remote).
The character you selected in step 6
lights up and the cursor shifts to the
right.
8
Repeat steps 5 through 7 to
complete the entire title.
If you make a mistake, press CURSOR
or —► on the MD deck (or or ►►
for MD on the remote) until the character
you want to change flashes, then repeat
steps 5 through 7,
To erase the character, press EDIT/NO
while the character is flashing.
3
Press YES to complete the labeling
procedure.
The disc name is displayed.
To cancel labeling
Press ■ on the MD deck.
To erase a disc name
1
Press EDIT/NO until "Name Erase ?"
appears.
2
Press YES.
The disc name appears.
"No Name" appears if no disc name is
stored.
3
Press or ►► for MD on the remote
until the disc name you want to erase
appears.
4 Press YES again.
"Complete" appears and the disc name is
erased.
Mote
I'ou can not label while recording on an MD.
19
^