A stereo fm program cannot be received in stereo, Auto cut, Blank disc – Sony CMT-M11C Manuel d'utilisation
Page 44: Cannot copy, Cannot edit, Cannot rec, Din unlock, Disc error, Disc full, Impossible
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Tuner
Severe hum or noise ("TUNED" or
“STEREO" flashes in the display.)-
• Adjust the antenna.
• The signal strength is too weak. Connect
the external antenna.
A stereo FM program cannot be received in
stereo.
• Press STEREO/MONO so that "STEREO"
appears.
MD messages
One of the following messages may appear or
flash in the display window during MD
operation.
Auto cut —.
The MD deck is pausing the recording
because silence continued for 30 seconds or
more during digital recording.
Blank Disc
The inserted recordable MD is brand new
or all tracks on the MD have been erased.
Cannot Copy
You cannot make a digital recording (See
"Guide to the Serial Copy Management
System" on page 43).
Cannot Edit
You tried to edit in Program or Shuffle Play
mode.
Cannot Rec
You tried to record on a premastered MD.
Din Unlock
The digital signal input was interrupted
during recording. Connect the optical cable
securely (see page 4).
Disc Error
The inserted MD is damaged or does not
contain a TOC.
Disc Full
There is no time remaining on the disc (See
"System Limitations of MDs" on page 43).
Impossible
You tried to combine from the first track on
an MD, which is not possible.
MD Protected
The inserted MD is protected against
Name Full
There is no more space to store track or
disc titles.
NO DISC
There is no MD in the deck.
No Track
The inserted MD has a disc title but no
tracks.
PUSH STOP!
You try to change the play mode during
playing (or playing pause).
Rec Level Over
A high-level signal was input during
analog recording with TAPE input jack (see
" 'Rec Level Over' appears during
recording" on page 44).
Retry
The MD deck is redoing the recording
because of vibrations or disc scratches
encountered during recording.
Retry Error
Due to vibration affecting the deck or
scratches on the MD, several recording
attempts were made but with no success.
Smart Space
The signal was input again after silence
continued for 3 to 30 seconds or less during
digital recording.
Sorry
You tried to combine tracks that cannot be
combined.
45
^