Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 7)

XM-124 Standard Dynamic Measurement Module 7
Rockwell Automation Publication 1440-IN001B-EN-P - October 2013
4. Press down on the terminal base unit to lock the terminal base unit onto
the DIN rail.
If the terminal base unit does not lock into place, use a screwdriver or similar
device to open the locking tab, press down on the terminal base unit until it is
flush with the DIN rail, and release the locking tab to lock the base in place.
Wire the Module
Wiring to the module is made through the terminal base unit on which the
module mounts. The XM-124 module is compatible only with the XM-940
terminal base unit, catalog number 1440-TB-A.
XM-940 Terminal Base Unit
XM-940 (catalog number 1440-TB-A)