Aquascape UltraKlear UV Clarifier (95036, 95037 & 95038) Manuel d'utilisation
Page 7
7
www.aquascapeinc.com |
☎
CAN 1-866-766-3426 |
☎
US 1-866-877-6637
OperatiOn and MaintenanCe
the ultraKlear
®
uV clarifier eliminates single-celled algae
commonly referred to as green water. for most ponds
the process should take approximately 1 week, however
significant algae blooms may take 2-3 weeks to clear.
• Bulb life – for effective clarification the uV bulb should
be replaced after 12 months of continuous use. NOTE:
Even though the UV bulb still emits light it may have lost
tO aCCeSS the qUartz tUbe
1. always unplug both the pump and the ultraKlear
®
uV clarifier before servicing.
2. release the latch tab by pulling/pushing it towards the
ballast about ¼”.
3. rotate the ballast counter-clockwise about ½” to release
it from the locked position and carefully slide out the
ballast with quartz tube attached.
its effectiveness at clarifying if the recommended operating
time has been exceeded.
• Cleaning/Replacing the quartz tube and UV bulb –
a dirty quartz tube will reduce the effectiveness of the uV
bulb. Debris and mineral deposits can be cleaned using a
mild acid like white vinegar or a non-abrasive calcium, lime
or rust remover with a soft bristled brush or sponge.
4. the quartz sleeve can now be accessed for cleaning
or replacement.
95085 UltraKlear UV Clarifier Instructions FINAL 12-13.indd 7
12/12/13 4:39 PM