Aquascape UltraKlear UV Clarifier (95036, 95037 & 95038) Manuel d'utilisation
Page 6
1½”
1¼”
1”
¾”
1½”
1¼”
1”
remove
cut
here
cut
here
1½”
1¼”
remove
cut
here
1½”
remove
Hosetail ready for ¾” tubing
Hosetail ready for 1¼” tubing
Hosetail ready for 1” tubing
Hosetail ready for 1½” tubing
6
☎
US 1-866-877-6637 |
☎
CAN 1-866-766-3426 | www.aquascapeinc.com
• select the Multi-Hose adapter based on the diameter of
the tubing you are using. it is recommended to use as
large of a diameter of tubing as possible (up to 1 ½ inch
diameter) in order to achieve maximum water flows.
• if using a diameter pipe larger than the smallest section
of the Multi-Hose adapter, trim off the smaller sections to
avoid any flow restriction.
• we recommend using a hose clamp (not included)
to secure tubing onto the fitting.
• after connecting the plumbing plug the pump and the
ultraKlear
®
fixture to an outlet that is protected by a
ground fault interrupter (gfi). once the pump is running
and water is circulating through the ultraKlear
®
fixture,
check for any fitting leaks where the external connections
Installation of stainless steel hose clamp
stainless
steel
hose
clamp
1½”
Kink-Free
tubing
are made. since the filter is located outside the pond
even a small leak must be corrected. check the uV
indicator to confirm that the uV light is “on” inside the
ultraKlear
®
fixture.
95085 UltraKlear UV Clarifier Instructions FINAL 12-13.indd 6
12/12/13 4:39 PM