Dts digital surround, Dts-es, Dts neo:6 – Pioneer VSX-C502-S Manuel d'utilisation

Page 50: Dts 96/24, Pcm (pulse code modulation), Specifications, Additional information 11

Advertising
background image

Additional information

11

50

En

DTS Digital Surround

You can identify a DTS Digital Surround encoded source
by the following logo:

DTS Digital Surround is a 5.1-channel audio encoding
system from Digital Theater Systems Inc. for DVD
soundtracks. Like Dolby Digital, it provides six discrete
channels of audio, including an LFE channel.

DTS-ES

DTS-ES (the ES stands for Extended Sound) is a decoder
that is capable of decoding both DTS-ES Discrete 6.1 and
DTS-ES Matrix 6.1 encoded sources. DTS-ES Discrete 6.1
gives ‘true’ 6.1 channel sound, with a completely
separate (discrete) surround back channel. DTS-ES
Matrix 6.1 has a surround back channel matrixed into the
surround left/right channels.

DTS Neo:6

DTS Neo:6 can generate 6.1 channel surround sound
from any matrixed stereo source, such as video, TV, etc.
It uses both the channel information already encoded
into the source, as well as its own processing to
determine channel localization.

DTS 96/24

DTS 96/24 is an extension of the original DTS Digital
Surround which adds 96 kHz sampling rate (DTS Digital
Surround is already 24-bit).

PCM (Pulse Code Modulation)

PCM (also known as Linear PCM) is a digital audio
coding system that does not use compression to reduce
the amount of data needed to represent the analog audio.
PCM audio can be found on CDs and some DVDs.

Specifications

Amplifier section

Continuous Power Output (

STEREO

mode)

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 W + 60 W

(DIN 1 kHz, THD 1 %, 8

)

Continuous Power Output (

SURROUND

mode)

Front . . . . . . . . . . . . . . . 75 W/ch (DIN 1 kHz, THD 1 %, 8

)

Center . . . . . . . . . . . . . . . . . 75 W (DIN 1 kHz, THD 1 %, 8

)

Surround . . . . . . . . . . . 75 W/ch (DIN 1 kHz, THD 1 %, 8

)

Surround back . . . . . . . . . . 75 W (DIN 1 kHz, THD 1 %, 8

)

RMS Power Output

Front . . . . . . . . . . . . . . . . . 100 W/ch (1 kHz, THD 10 %, 6

)

Center . . . . . . . . . . . . . . . . . . . 100 W (1 kHz, THD 10 %, 6

)

Surround . . . . . . . . . . . . . 100 W/ch (1 kHz, THD 10 %, 6

)

Surround back . . . . . . . . . . . . 100 W (1 kHz, THD 10 %, 6

)

• Above specifications are applicable when the power

supply is 230V.

Audio section

Input (Sensitivity/Impedance) . . . . . . . . . . . . 200 mV/47 k

Output (Level/Impedance) VIDEO / DVR/TV . 200 mV/2.2 k

Video section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75

Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75

FM tuner section

Frequency Range . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz
Usable Sensitivity . . . . . . Mono:15.2 dBf, IHF (1.6 µV/ 75

)

50 dB Quieting Sensitivity. . . . . . . . . . . . . . . Mono: 20.2 dBf

Stereo: 41.2 dBf

Signal-to-Noise Ratio . . . . . . . . . . . Mono: 76 dB (at 85 dBf)

Stereo: 72 dB (at 85 dBf)

Signal-to-Noise Ratio (DIN) . . . . . . . . . . . . . . . Mono: 62 dB

Stereo: 58 dB

Distortion . . . . . . . . . . . . . . . . . . . . . . . .Stereo: 0.6 % (1 kHz)
Alternate Channel Selectivity . . . . . . . . . . . . 70 dB (400 kHz)
Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . 40 dB (1 kHz)
Frequency Response. . . . . . . . . . . . 30 Hz to 15 kHz (±1dB)
Antenna Input (DIN) . . . . . . . . . . . . . . . . . 75

unbalanced

vsx-c501(WY).book 50 ページ 2004年4月23日 金曜日 午後2時56分

Advertising