Pioneer VSX-C502-S - Manuel (Page 26)

Getting started 05
26
En
Playing a source
Here are the basic instructions for playing a source (such
as a DVD disc) with your home theater system.
1 Turn on the power of the playback component
(for example a DVD player), your TV and subwoofer
(if you have one).
• If your source is the TV’s built-in tuner, then switch to
the channel you want to watch, otherwise make sure
that the TV’s video input is set to this receiver. (For
example, if you connected this receiver to the
VIDEO
1 jacks on your TV, make sure that VIDEO 1 input is
now selected.)
2 If the receiver isn’t already on, press
RECEIVER to switch it on.
3 Change the receiver input to the source you
want to play.
You can use the front panel INPUT SELECTOR knob or
Input/remote control mode select buttons on the
remote.
4 Start playback of the DVD (or other component).
If you’re playing a Dolby Digital or DTS surround sound
DVD disc, you should hear surround sound. If you are
playing a stereo source, you will only hear sound from the
front left/right speakers in the default listening mode.
• See also Home theater sound on page 27 for more
information on different ways of listening to sources.
5 Use MASTER VOLUME control (front panel or
remote) to adjust the volume level.
• Turn down the volume of your TV so that all the sound
is coming from the speakers connected to this
receiver.
Note
• If you need to change the input signal type from
digital to analog (stereo or multichannel), press
RECEIVER then SIGNAL SEL (see also Selecting the
input signal type on page 34).
• For more detailed surround sound setup, see The
System Setup menu on page 36.
RECEIVER
RECEIVER
RECEIVER
SIGNAL SEL
DVD
VIDEO
STB
FRONT FM/AM
DVR/TV
MASTER
VOLUME
MASTER VOLUME INPUT SELECTOR PHONES ADVANCED NEO:6 STANDBY/ON
FRONT INPUT DIGITAL IN VIDEO AUDIO L R
PHONES/SETUP MIC
DTS 2PRO LOGICII 2PRO LOGICIIX 2DIGITAL AV DIRECT
DOWN UP
vsx-c501(WY).book 26 ページ ２００４年４月２３日 金曜日 午後２時５６分