Installation/operation – Magikitch'n MCF18 Manuel d'utilisation

Page 7

Advertising
background image

INSTALLATION/OPERATION

5

a) A shut-off valve terminating in a proper cylinder valve outlet specified in current standards.
b) A safety relief valve having direct communication with the vapor space of the cylinder.
c) A collar to protect the cylinder shut-off valve.
d) An arrangement for vapor withdrawal only.
e) A bottom ring for securing to the cylinder support assembly.

WARNING

Protect regulator vent openings from the elements. Do not expose regulators to rain,

snow, or ice. Store regulators in cabinet when not in use.

WARNING

Only install and operate cylinders in the retaining brackets on the appliance. Cylinders

must be secured against tip-over and from heat sources at all times. Do not store unused

gas cylinders in any compartments on the appliance that are not intended for cylinder

storage. Unauthorized storage could lead to an explosion, fire, or personal injury.

NOTICE

This appliance is not intended for use with a remote gas system.

Propane Cylinder installation and transportation


Handling, storage, and transportation of propane cylinders must be in accordance with Storage and Handling of
Liquid Petroleum Gases, ANSI/NFPA 58 or Natural Gas and Propane Installation Code, CSA B149.1.
Therefore:

 Always use the protective cap provided with your cylinder whenever it is not connected to your

appliance.

 Do not store in a building, garage or any other enclosed area. Store only in a well ventilated area.

 Do not store in the vicinity of any gas burning apparatus or in any high heat area such as a closed car or

trunk, or in direct sunlight.

 Do not smoke while transporting a cylinder in your vehicle.

 Transport and store cylinder(s) in an upright position only.

 Store out of reach of children.

 Allow only qualified LP gas dealer to fill or repair cylinder(s).

 Do not allow the cylinder to be over filled.

 Make sure the LP gas dealer checks the cylinder for leaks after filling.


Mount LP cylinder securely on brackets provided. Slide top cylinder bracket down onto cylinder, and tighten
wing nuts. Connect gas hose by inserting connector into LP cylinder and securing by turning green knob, until
tight. Open valve on LP cylinder.

Turn off valve on LP cylinder when appliance is not in use.

Storage of the appliance indoors is permissible, only if the LP cylinder is disconnected and removed from the
appliance.

To transport, ensure valve on LP cylinder is closed. Leave LP cylinder mounted upright in brackets on
appliance. If completely disconnected from appliance, LP cylinder must be transported and stored in an upright
position. Remove all liquid from cook tank prior to transporting appliance.

WARNING

The Pressure regulator and the hose assembly supplied with the appliance must be used.

A replacement pressure regulator and hose assembly must be that specified by the

manufacturer.

CAUTION

Advertising
Ce manuel est liée aux produits suivants: