Sony CMT-MD1 - Manuel (Page 8)

8
Step 2: Setting the
time
You must set the time before you use the
timer functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The European model is used for illustration
purpose.
1
Press CLOCK/TIMER SET while
the power is off.
The clock appears and the hour
indication flashes.
2
Press +/– to set the hour.
= +
( P p
1 / u
– +
– +
–
+
= +
( P p
2,4
3,5 1
3
CURSOR ?
: 0 0 0
3
Press ENTER/YES or CURSOR /.
The minute indication flashes.
: 1 0 0 1
4
Press +/– to set the minute.
5
Press ENTER/YES.
The clock starts.
If you have made a mistake
Press CURSOR ? or / repeatedly so that
the incorrect item flashes, then set it again.
To change the preset time
You can change the preset time while the
power is on.
1 Press CLOCK/TIMER SET.
2 Press +/– repeatedly until “CLOCK SET ?”
appears.
3 Press ENTER/YES.
4 Repeat steps 2 through 5.
Tips
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).