Marking track numbers, The md deck - recording, Level-synchro recording – Sony CMT-MD1 Manuel d'utilisation
Page 35: Press rec. the md stands by for recording, Press enter/yes on the remote, Press enter/yes on the remote again, Press md
35
The MD Deck - Recording
Marking track
numbers
The track numbers can be marked as follows:
• Mark the track numbers automatically.
When you record from this system’s CD
(digital recording) or during level-synchro
recording, the track numbers are
automatically marked.
• At any point while recording.
You can mark the track numbers while
recording any sources.
Marking track numbers
automatically while
recording
–– Level-Synchro Recording
The “LEVEL-SYNC” is factory set to ON and
the track numbers are automatically marked.
If “LEVEL-SYNC” is not displayed during
recording, turn it on as follows. Track
numbers are automatically marked when the
input signal is under a certain level for more
than two seconds and then exceeds the
previous level.
(P
1/u
=
0
–
p
)
+
+
(P
p
g
+
–
6
6
MD
p
1
1
Press REC. The MD stands by for
recording.
2
Press PLAY MODE on the remote
until “PGM” and “SHUFFLE”
disappear.
3
Press EDIT, then press +/– on the
remote repeatedly until
“LevelSync ?” appears.
4
Press ENTER/YES on the remote.
“LevelSync ON ?” appears.
5
Press ENTER/YES on the remote
again.
“LEVEL-SYNC” lights up.
6
Press MD
^.
Recording starts.
To stop recording
Press MD
p.
=
+
(
P
p
1
/
u
–
+
–
+
–
+
=
+
(
P
p
MD
p
4,5
3
3
2
continued