Sony CMT-MD1 - Manuel (Page 34)

34
(P 1/u
= 0
–
p
) +
+
(P p
g
+
–
6
MD p
2 3
1
Insert a recordable MD.
2
Press FUNCTION repeatedly to
select the source (e.g., TUNER) you
want to record.
3
Press REC.
The MD stands by for recording.
= +
( P p
1 / u
– +
– +
–
+
= +
( P p
MD p
5
4
Start playing the source you want to
record.
5
Press ENTER/YES on the remote at
the point you want to start
recording.
Recording of the source starts with the
6 seconds of audio data stored in the
buffer memory.
If you use an MD with tracks already
recorded on it, the system automatically
locates the end of the recorded portion
and starts the new recording from there.
To stop Time Machine Recording
Press MD p.
While “TOC” is lit or is flashing
To ensure complete recording, do not move
the system or disconnect the power cord. The
system updates the Table of Contents (TOC)
while “TOC” is flashing.
Notes
• The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
– Remove the MD.
– Press
1/u to turn off the system.
• The system starts storing audio data when the MD
is in recording pause in step 3 and you start
playing the source. If you press ENTER/YES on
the remote within 6 seconds of this point then
Time Machine Recording starts with less than 6
seconds of audio data.
• Please do not use MDs with labels that are
protruding or labels that have not been positioned
correctly. Use of such MDs may damage this
system.
Starting recording with 6 seconds
of prestored audio data
(continued)