Sony STR-DA5200ES - Manuel (Page 78)

78 GB
Enter the frequency of a station directly by
using the numeric buttons.
1
Connect a TV monitor to this
receiver.
Refer to “3: Connecting the monitor for
displaying menus” (page 19).
2
Turn on the receiver and the TV.
3
Press RECEIVER to enable
receiver operation.
4
Press ON SCREEN.
The menu list of this receiver appears on
the TV screen. Press MENU if the menu
list does not appear on the TV screen.
5
Press V/v repeatedly to select
“FM” or “AM,” then press or
b.
6
Press OPTIONS.
7
Press V/v to select “Direct
Tuning,” then press .
8
Press the numeric buttons to
enter the frequency, and then
press
to enter.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
9
Press .
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right
frequency. If not, repeat steps 8 to 9. If you still
cannot tune in a station, the frequency is not
used in your area.
Direct tuning
5
6
3
8
5,
7-9
MENU
2
4