Sony STR-DA5200ES - Manuel (Page 12)

12 GB
a)
See the table on page 116 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
R TOP MENU
Press to display the menu or
on-screen guide of the DVD
player on the TV screen. Then
use
V/v/B/b and to perform
menu operations.
MENU Press to display the menus of
the DVD player on the TV
screen. Then use
V/v/B/b and
to perform a menu
operations (page 116).
NIGHT
MODE Press RECEIVER (4) and
then press NIGHT MODE to
activate the NIGHT MODE
function (page 67).
INPUT
MODE Press RECEIVER (4) and
then press INPUT MODE to
select the input mode when the
same components are
connected to both digital and
analog jacks (page 93).
S MUTING
Press to silence the sound
(page 49).
T MASTER
VOL +
b)
/–
Press to adjust the volume level
of all speakers at the same time
(page 48).
TV VOL +/– Press TV (wk) and then press
TV VOL +/– to adjust the
volume level of the TV.
U DISC SKIP
Press to skip a disc when using
a multi-disc changer.
V RETURN/
EXIT O
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen (page 116).
W ON SCREEN Press to turn the GUI display
mode on or off. Press MENU
(qd) to display the menu when
“GUI ON” appears on the
display.
Name Function
X CLEAR
Press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
>10 Press to select
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
D.TUNING Press to enter direct tuning
mode (page 78, 84).
Y A.DIRECT Press SHIFT (wj) then press
A.DIRECT to switch the audio
of the selected input to analog
signal without any adjustment
(page 111).
2CH Press to select sound filed
(page 59).
Z SLEEP
Press SHIFT (wj) then press
SLEEP to activate the Sleep
Timer function and the duration
which the receiver turns off
automatically (page 101).
A.F.D Press to select sound filed
(page 60).
wj SHIFT Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
wk TV Press to enable the TV
operation.
wl RM SET UP Press to set up the remote.
Name Function