Sony STR-DA5200ES - Manuel (Page 111)

111 GB
O
the
r O
p
erati
ons
You can also use the 2CH, A.F.D., MOVIE, or
MUSIC buttons on the receiver.
Press SHIFT then press A.DIRECT.
For details on the tuner function, see “Tuner
Operations” (page 77).
Tuning radio stations
1 Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO,” and then turn
TUNING to select stations.
Selecting a frequency directly
(Direct tuning)
1 After selecting the FM or AM band,
press D.TUNING.
2 Press the numeric buttons to enter the
frequencies, and then press
to
enter.
3 Press ENTER to enter the selection.
1
Tune in the station that you
want to preset.
For details on the operation, refer to
“Tuning radio stations.”
2
Press MEMORY.
“MEMORY” appears on the display for a
few seconds. Perform steps 3 and 4 before
the display changes.
3
Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
4
Press ENTER.
The station is stored as the selected preset
number. If “MEMORY” disappears
before you select the preset number, start
again from step 2.
5
Repeat steps 1 to 4 to preset
another station.
Selecting a preset station
1 Press TUNER repeatedly to select the
FM or AM band.
2 Press PRESET+ or PRESET –
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET,”
then use TUNING to select the preset
stations you want.
Listening to the sound without
any adjustment (2CH ANALOG
DIRECT)
Listening to the FM/AM radio
Presetting radio stations