Sony CDX-R5515X - Manuel (Page 7)

7
G DSO button 2
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
H OFF button
To power off/stop the source.
I SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
J (front panel release) button 4
K SOURCE button
To power on/change the source (Radio/CD/
MD*
1 ).
L MODE button 8, 11
To select the radio band (FM/AM)/select the
unit*
2 .
M RESET button (located behind the front
panel) 4
N Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1 :
(1)/(2): GP* 3 /DISC* 2 –/+
To skip groups (press); skip groups
continuously (press and hold).
(3): REP 8
(4): SHUF 8
(5): BBE MP 3
To activate the BBE MP function, to set
“BBEMP-ON” during playback on this unit.
To cancel, set “BBEMP-OFF.”
O BTM button 8
To start the BTM function.
P SENS button
To improve weak reception: LOCAL/
MONO.
Q LIST/CAT button 9, 11
To list up.
R Receptor for the card remote
commander
S Disc slot 5
T Z (eject) button 6
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa < (.)/, (>) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
ws VOL +/– button
To adjust volume.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
wf SCRL button 8
To scroll the display item.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 11.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.