Sony CDX-CA400 Manuel d'utilisation

Fm / am compact disc player, Cdx-ca400

Advertising
background image

Sony Corporation © 2002

Printed in Korea

CDX-CA400

Cautions

• This unit is designed for negative ground 12 V

DC operation only.

• Do not get the wires under a screw, or caught

in moving parts (e.g. seat railing).

• Before making connections, turn the car

ignition off to avoid short circuits.

• Connect the yellow and red power input leads

only after all other leads have been connected.

Run all ground wires to a common ground

point.

• Be sure to insulate any loose unconnected

wires with electrical tape for safety.

• The use of optical instruments with this

product will increase eye hazard.

Notes on the power supply cord (yellow)
• When connecting this unit in combination with

other stereo components, the connected car
circuit’s rating must be higher than the sum of
each component’s fuse.

• When no car circuits are rated high enough,

connect the unit directly to the battery.

Parts Iist (1)

The numbers in the list are keyed to those in the
instructions.

Caution

Handle the bracket 1 carefully to avoid injuring
your fingers.

TOP

Installation/Connections

Installation/Connexions

FM/AM
Compact Disc
Player

Connection example (2)

Notes (2-A)
• Be sure to connect the ground cord before

connecting the amplifier.

• If you connect an optional power amplifier and do

not use the built-in amplifier, the beep sound will
be deactivated.

Connection diagram (3)

1

To a metal surface of the car
First connect the black ground lead, then
connect the yellow and red power input leads.

2

To the power antenna control lead or power
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if there

is no power antenna or antenna booster, or
with a manually-operated telescopic antenna.

• When your car has a built-in FM/AM antenna in

the rear/side glass, see “Notes on the control
and power supply leads.”

3

To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.

4

To the +12 V power terminal which is energized
in the accessory position of the ignition key
switch
Notes
• If there is no accessory position, connect to the

+12 V power (battery) terminal which is
energised at all times.
Be sure to connect the black ground lead to it
first.

• When your car has a built-in FM/AM antenna in

the rear/side glass, see “Notes on the control
and power supply leads.”

5

To the +12 V power terminal which is energised
at all times
Be sure to connect the black ground lead to it
first.

1

TOP

4

5

Equipment used in illustrations (not supplied)
Appareils utilisés dans les illustrations (non fournis)

Rear speaker
Haut-parleur arrière

Front speaker
Haut-parleur frontal

1

Power amplifier
Amplificateur de puissance

CD/MD changer
Changeur de CD/MD

Ч

4

2

Ч

2

3

2

B

BUS AUDIO IN

BUS CONTROL IN

A

AUDIO OUT REAR

3-238-717-11 (1)

Advertising