Sony MEX-GS600BT - Manuel (Page 48)

48
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Connect it again.
 Press  to remove the disc.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
NO DEV (No Device)
 “USB” is selected as source without a USB
device connected. A USB device or a USB cable
has been disconnected during playback.
– Be sure to connect a USB device and USB
cable.
NO DISC
 The disc is ejected, or “CD” is selected as the
source without inserting the disc.
NO MUSIC
 The disc or USB device does not contain a
music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.
NO NAME
 A disc/album/artist/track name is not written
in the track.
NOT FOUND
 There is no item beginning with the selected
letter in Alphabet search.
OFFSET
 There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing
.
– Indicates that the USB device is out of order,
or an unsupported device is connected.
PUSH EJT (Push Eject)
 The disc cannot be ejected.
– Press
 (eject) (page 9).
READ
 The unit is reading all track and album
information on the disc.
– Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT (USB Not Supported)
 The connected USB device is not supported.
– For details on the compatibility of your USB
device, visit the support site.
“ ” or “ ”
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
“ ”
 The character cannot be displayed with the
unit.
For Bluetooth function:
BT BUSY (Bluetooth Busy)
 The phonebook and the call history of the
cellular phone are not accessible from this unit.
– Wait for a while, and then try again.
EMPTY
 The call history is empty.
ERROR
 BT Initialize failed.
 Phonebook access failed.
 Phonebook content was changed while
accessing the cellular phone.
– Access the phonebook in the cellular phone
again.
MEM FAILURE (Memory Failure)
 This unit failed to store the contact in the
preset dial.
– Make sure that the number you intend to
store is correct (page 28).
MEMORY BUSY
 This unit is storing data.
– Wait until storing has finished.