Kolpin 20074 - UTV GUN RACK RISER PLATE - Manuel

20074 UTV GUN RACK RISER PLATE
Riser Plate
UTV Gun Rack Assembly:
1. Follow the assembly instructions of the 20073.
2. Bolt the Riser Plate to the main tube. This may be set vertically or use the slots to custom fit it to
the angle of your UTV.
UTV Gun Rack Mounting:
1. Attach the UTV Gun Mount Riser Plate to the floor of your UTV using the 4 - 3/8” x 1.00” Bolts,
4 – 3/8” Nylock nuts and 8 washers included in the 20073 UTV Gun Rack. Drilling is required.
CAUTION: Be sure that you are not drilling into anything under your floor as it may
void any warranty of your Vehicle. You may find it useful to pull up the flooring and
drill holes where you want the UTV Gun Mount to be at.
UTV Gun Rack Use:
• Place the Gun into the Kolpin UTV Gun Mount and secure with the Rubber strap.
• The UTV Gun Mount is designed to carry your Guns safely and securely from one destination to
the next.
CAUTION: Always make sure gun is unloaded and pointed in a safe direction before
traveling.
CAUTION: Check with local authorities to make sure you are able to travel with
uncased weapon.
Kolpin Powersports, Inc.
107 Industrial Drive, Fox Lake, WI
Phone #: (877) 9KOLPIN or (920) 928-6514
www.kolpinpowersports.com
[email protected]
Description Quantity
Riser Plates 2