Kolpin 90260 – POLARIS RZR 2” RECEIVER HITCH - Manuel

Rev. 2
90260 – POLARIS RZR 2” RECEIVER HITCH
Mounting Specific Instructions:
1. If your RZR has a BOLT ON Hitch you will need to REMOVE the three Bolts and Nuts that
attach it to the rear frame member. If your machine has a WELDED on hitch, nothing needs
to be changed.
2.
Next, you will notice that the (4) holes on the plate of the 2” RZR hitch line up with the (4)
holes on the RZR A-arm frame support brackets. Take the (4) - 5/16” Hex Head Bolts and
place them through the hitch utilizing the (8) Washers and (4) Nuts provided.
3.
Tighten all hardware securely!
4.
Place the 5/8” x 3.00” Bent hitch pin through the hitch and secure using the R-Clip!
NO. Description QTY.
1 2” Receiver Hitch 1
2 5/16” x 1.00” Hex Head Bolt 4
3 5/16” Nylock Nut 4
4 5/16” Washer 8
5 5/8” x 3” Bent Hitch Pin 1
6 R-Pin 1
1
Kolpin Outdoors, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpinpowersports.com
[email protected]
Hitch Uses:
 The 2” Receiver hitch is designed to allow you
to quickly and easily mount and dismount the
DirtWorks 3-Point Hitch system to the Polaris
RZR.
 This hitch can also be used for heavy duty
towing applications, such as moving your
boats, trailers, etc.
Hitch Compatible With:
 All Polaris RZR UTV’s!
Add desired draw bar (not
included) into hitch and secure
with 5/8” x 3.00” Bent Hitch Pin
and R-Clip. Kolpin offers a
Multi Hitch, P/N 85620, which
provides multiple towing
options.
OPTIONAL KOLPIN MULTI HITCH
NOT INCLUDED