Pioneer HD VIDEO SYSTEM HD-V9000 - Manuel (Page 45)

45
En
06
Initial Settings
 Video output settings (Video Output)
1. • When EDID is set to Off or when the display is not connected by HDMI cable, an “*” is displayed for the current setting (ex.: 1280 x 720p*).
• When EDID is set to On or when the display is connected by HDMI cable, an “*” is displayed for recommended resolution
(ex.: 1280 x 720p*).
2. • The EDID function automatically changes the Scaler Setting settings. The Scaler Setting settings can be changed manually, but they are
automatically set with the EDID function when the power is turned back on.
• Video signals with the same resolution are output from the
COMPONENT VIDEO OUT and HDMI OUT terminals.
3. Only settable in the stop mode. For some files, the picture will not become sharper even when Still Picture is set to Field.
4. 1920 x 1080p synchronizing signals are not supported.
 Display settings
5. Only settable in the stop mode.
Setting item Settings Description
Scaler Setting
1
720 x 480i
(default for North
American model)
720 x 480 pixel interlaced signals are output from the video output terminals.
720 x 480p 720 x 480 pixel progressive signals are output from the video output terminals.
720 x 576i
(default for
European model)
720 x 576 pixel interlaced signals are output from the video output terminals.
720 x 576p 720 x 576 pixel progressive signals are output from the video output terminals.
1280 x 720p 1280 x 720 pixel progressive signals are output from the video output terminals.
1920 x 1080i 1920 x 1080 pixel interlaced signals are output from the video output terminals.
1920 x 1080p 1920 x 1080 pixel progressive signals are output from the video output terminals.
EDID
Off
Video signals with the resolution set at Scaler Setting are output from the HDMI OUT
terminal.
On
Video signals with a resolution appropriate for the connected display are selected
automatically and output from the HDMI OUT terminal. 2
TV Screen
4:3 The aspect ratio is set to the conventional size (4:3).
16:9 The aspect ratio is set to wide size (16:9).
Still Picture 3
Field Shaking when playing still pictures is eliminated, and the picture quality is clearer.
Frame This is the normal mode.
Sync Out
(During SQ)
Off
Video signals are always output, even when not in the play mode and when no menu screen
is displayed and there is no video signal (synchronizing signals are always output). The blue
or black background color is displayed in the pause and stop modes.
On
No video signal is output when not in the play mode and when no menu screen is displayed
(no synchronizing signals are output).
External Sync 3
Off
The component output signal is not synchronized with the external synchronizing signal
input to the
EXT SYNC IN terminal.
On
The component output signal is synchronized with the external synchronizing signal input
to the
EXT SYNC IN terminal. For the external synchronizing signal, input NTSC/PAL Black-
Burst signals or HD tri-level synchronizing signals (page 47). 4
Setting item Settings Description
On Screen Display
Off Playback information (page 35) is not displayed on the display.
On Playback information (page 35) is displayed on the display.
Monitor OSD
Off The monitor’s on-screen display is not superimposed on the VIDEO OUT terminal’s picture.
Top
The monitor’s on-screen display is superimposed over the top half of the VIDEO OUT
terminal’s picture.
Bottom
The monitor’s on-screen display is superimposed over the bottom half of the VIDEO OUT
terminal’s picture.
Background
5
Black Sets the background color in the pause and stop modes to black.
Blue Sets the background color in the pause and stop modes to blue.