Before you start, What’s in the box, Putting the batteries in the remote control – Pioneer HD VIDEO SYSTEM HD-V9000 Manuel d'utilisation

Page 17: Updating the firmware, Website concerning this unit, 01 before you start

Advertising
background image

17

En

01

Chapter 1

Before you start

What’s in the box

• Remote control x 1

• AA/R6 batteries x 2

• Power cord x 1

• Rack mount brackets x 2

• HDMI retaining cover x 1

• Screws (black) x 8

• Warranty

• Operating instructions (this booklet)

A large Philips screwdriver (

 No. 2) is required to mount

the rack mount bracket. Please procure one.

Putting the batteries in the
remote control

1

Open the rear cover and insert the included

batteries (AA/R6 x 2).
Insert as indicated by the

 and  marks in the battery

compartment.

Caution

• Do not use any batteries other than the ones

specified. Also, do not use a new battery together with
an old one.

• When loading the batteries into the remote control,

set them in the proper direction, as indicated by the
polarity marks (

 and ).

• Do not heat batteries, disassemble them, or put them

into flames or water.

• Batteries may have different voltages, even if they look

similar. Do not use different kinds of batteries
together.

• To prevent leakage of battery fluid, remove the

batteries if you do not plan to use the remote control
for a long period of time (1 month or more). If the fluid
should leak, wipe it carefully off the inside of the case,
then insert new batteries. If a battery should leak and
the fluid should get on your skin, flush it off with large
quantities of water.

• When disposing of used batteries, please comply with

governmental regulations or environmental public
institution’s rules that apply in your country/area.

• Do not use or store batteries in direct sunlight or

other excessively hot place, such as inside a car or
near a heater. This can cause batteries to leak,
overheat, explode or catch fire. It can also reduce the
life or performance of batteries.

Updating the firmware

When the software is updated, information concerning
this product may be published on the Pioneer website.
Check the update or service information concerning this
product on the site.

Website concerning this unit

In order to allow users to take maximum advantage of this
unit’s functions, a “Communications Interface User’s
Manual” and Windows application (HD PILOT) are
available on the Pioneer website. In addition to reading
this manual, please also visit the Pioneer website.

http://pioneer.jp/biz/

Advertising