Basic operation, Loading the sd memory card, Removing the sd memory card from this unit – Pioneer HD VIDEO SYSTEM HD-V9000 Manuel d'utilisation

Page 36: 05 basic operation, Chapter 5

Advertising
background image

05

36

En

Chapter 5

Basic Operation

Loading the SD
memory card

Caution

• If the SD memory card is inserted or removed while

this unit’s power is still on, it may not play properly. If
this happens, turn the power off then back on to
reload the SD memory card’s information.

1

Set the groove in the door lock key on the main

unit’s front panel so that it is vertical.
The door is unlocked and can now open.

2

Open the door and load the SD memory card.

Hold the SD memory card with the front facing upwards
and insert it slowly all the way into the slot until it stops.

3

Close the door and set the groove in the door lock

key so that it is horizontal.
The door is locked and no longer opens.

4

Turn on the power.

Press the

STANDBY/ON button.

Playback is possible once the

POWER ON message

appears. About one minute is required before playback
becomes possible. Take this startup time into account
when controlling the power externally.

Note

• See page 21 for the folder structure of SD memory

cards used on this unit.

Removing the SD memory
card from this unit

Caution

• Do not pull the SD memory card out or unplug this

unit’s power cord while the

CARD ACCESS indicator

is flashing. Doing so could destroy the data recorded
on the card.

1

Turn off the power.

Press the

STANDBY/ON button. After the POWER OFF

message appears, the display turns off and the
STANDBY/ON button’s indicator switches from green
to orange.

2

Set the groove in the door lock key so that it is

vertical.
The door is unlocked and can now open.

3

Open the door, push the SD memory card in so

that it pops out a little, then pull it out horizontally.

• Do not forcibly insert or pull out the SD memory card.

Doing so could damage the SD memory card or lead
to malfunction of this unit.

• Do not insert any objects other than SD memory

cards into the SD memory card insertion slot.
Inserting coins or other metal objects could damage
the internal circuitry and lead to malfunction.

• If the SD memory card is inserted or removed while

this unit’s power is still on, it may not play properly. If
this happens, turn the power off then back on to
reload the SD memory card’s information.

SEARCH

FRM

/TIME

REPEAT MEMORY RECALL

DISPLAY

PLAY

MODE

NAVI-

GATOR

SETUP

RETURN

OUTPUT

RESOLUTION

+

-

STANDBY/ON



Unlocked

Groove is
vertical



Locked

Groove is
horizontal

Advertising