Speaker setting, The system setup menu 07 – Pioneer VSX-415 Manuel d'utilisation

Page 42

Advertising
background image

The System Setup menu

07

42

En

Speaker setting

Use this setting to specify your speaker
configuration (size, number of speakers). It is a
good idea to make sure that the settings made
in

Using the Quick Setup

on page 10 are

correct.

1

Select

SP SET

from the SP SETUP menu.

2

Use

/

(cursor left/right) to choose the

speaker(s) that you want to set then select a
speaker size.

Use

/

(cursor up/down) to select the size

(and number) of each of the following
speakers:

Front

(

F

) – Select

LARGE

if your front

speakers reproduce bass frequencies
effectively, or if you didn’t connect a
subwoofer. Select

SMALL

to send the bass

frequencies to the subwoofer.

1

Center

(

C

) – Select

LARGE

if your center

speaker reproduces bass frequencies
effectively, or select

SMALL

to send bass

frequencies to the other speakers or
subwoofer. If you didn’t connect a center
speaker, choose

NO

(the center channel is

sent to the front speakers).

Surround

(

S

) – Select

LARGE

if your

surround speakers reproduce bass
frequencies effectively. Select

SMALL

to

send bass frequencies to the other
speakers or subwoofer. If you didn’t
connect surround speakers choose

NO

(the sound of the surround channels is
sent to the front speakers or a subwoofer).

Surround Back

(

SB

) – Select

LARGE

if your

surround back speakers reproduce bass
frequencies effectively. Select

SMALL

to

send bass frequencies to the other
speakers or subwoofer. If you didn’t
connect surround back speakers choose

NO

.

2

Subwoofer

(

SW

) – LFE signals and bass

frequencies of channels set to

SMALL

are

output from the subwoofer when

YES

is

selected (see notes below). Choose the

PLUS

setting if you want the subwoofer to

output bass sound continuously or you
want deeper bass (the bass frequencies
that would normally come out the front and
center speakers are also routed to the
subwoofer). If you did not connect a
subwoofer choose

NO

(the bass

frequencies are output from other
speakers).

3

When you’re finished, press RETURN.

Tip

• If you have a subwoofer and like lots of

bass, it may seem logical to select

LARGE

for your front speakers and

PLUS

for the

subwoofer. This may not, however, yield the
best bass results. Depending on the
speaker placement of your room you may
actually experience a decrease in the
amount of bass due low frequency
cancellations. In this case, try changing
the position or direction of speakers. If you
can’t get good results, listen to the bass
response with it set to

PLUS

and

YES

or the

front speakers set to

LARGE

and

SMALL

alternatively and let your ears judge which

Note

1 If you select

SMALL

for the front speakers the subwoofer will automatically be fixed to

YES

. Also, the center, surround and

surround back speakers can’t be set to

LARGE

if the front speakers are set to

SMALL

. In this case, all bass frequencies are sent

to the subwoofer.
2 • If the surround speakers are set to

NO

, the surround back speakers will automatically be set to

NO

.

VSX_415-515.fm 42 ページ 2004年12月8日 水曜日 午後3時12分

Advertising
Ce manuel est liée aux produits suivants: