Pioneer D514 - Manuel (Page 31)

Setting up the receiver 06
31
En
Choosing your receiver setup
Even though you may already have your system
up and running after using the 5 minute guide
on pages 7 to 11, you should also be sure to
complete the following set up operations to
ensure the best possible surround sound. This
is particularly important when using Dolby
surround. You only need to make these settings
once (unless you change the placement of your
current speaker system or add new speakers,
etc.). Refer to the following pages for details on
each of the settings.
If you are using the Pioneer S-FCRW230/240
speaker system, you’ll have to set the
Crossover frequency to
200 Hz. You can leave
the Speaker setting and the Subwoofer
setting in the default settings.
INPUT SELECTOR
RECEIVER
CD-R/
TAPE/MD
MIDNIGHT/
LOUDNESS
ADVANCED
SURROUND STANDARD
TUNER
EDIT
RECEIVER
TOP MENU
DVD
CHSELECT MUTE
SETUP
STEREO
VOLUME
SLEEP
DVD/LD
CD FM AM
TV/SAT DVR/VCR DVD 5.1CH
FL DIMMER INPUT ATT
MENU
ENTER
1 Press RECEIVER to turn the power on.
2 Press RECEIVER.
3 Use } or ] to choose the option you
want to adjust.
It will be easiest to adjust each of the settings in
turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
Speaker setting (page 32)
Specify the number and type of speakers you
have connected.
Subwoofer setting (page 32)
Specify how the subwoofer is used.
Crossover frequency setting (page 33)
Determine which frequencies will be sent to the
subwoofer (or large speakers).
LFE attenuator setting (page 33)
Specify the peak level for the LFE channel.
Front speaker distance setting (page 33)
Specify the distance from your listening
position to your front speakers.
Center speaker distance setting (page 33)
Specify the distance from your listening
position to your center speaker.
Surround speaker distance setting (page 34)
Specify the distance from your listening
position to your surround speakers.
Subwoofer distance setting (page 34)
Specify the distance from your listening
position to your subwoofer.
Dynamic range control setting (page 34)
Compress the dynamic range of the sound
track.
Dual mono setting (page 34)
Isolate one channel when listening to discs with
dual mono encoding.
XRE3077A.En.31.36 03.12.4, 7:49 PM 31