Pioneer D514 - Manuel (Page 28)

Listening to your system 05
28
En
Listening in stereo
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
INPUT SELECTOR
RECEIVER
CD-R/
TAPE/MD
MIDNIGHT/
LOUDNESS
ADVANCED
SURROUND STANDARD
TUNER
EDIT
RECEIVER
TOP MENU
DVD
SETUP
ENTER
STEREO
SLEEP
DVD/LD
CD FM AM
TV/SAT DVR/VCR DVD 5.1CH
FL DIMMER INPUT ATT
MENU
• While listening to a source, press
STEREO/DIRECT (STEREO on the remote
control) for stereo playback.
Press repeatedly to switch between:
• STEREO – The audio is heard with your
surround settings and you can still use the
Midnight, Loudness, and Tone control
functions.
• DIRECT – Bypass all effects and surround
settings so that the audio remains as close to
the source audio signal as possible.
If you switch on Midnight listening, Loud-
ness, or the Tone controls when
DIRECT is
selected, the receiver automatically switches
to
STEREO.
Using the Virtual Surround
Back mode (VSB)
Selecting this mode allows you to hear a virtual
back channel through your surround speakers.
For example, you can choose to listen to
sources with no surround back channel
information (for example, 5.1 encoded material)
with emulated 6.1 encoding (
VSB ON).
Sometimes the material may sound better in
the 5.1 format for which it was originally
encoded. In this case you can simply switch it
off (
VSB OFF).
UP DOWN
MULTI JOG
MASTER VOLUME
ENTER
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D514
SPEAKER
IMPEDANCE
STEREO/
DIRECT
SIGNAL
SELECT MIDNIGHT/
LOUDNESS
VSB
MODE
E
TONE QUICK SETUP
MULTI JOG
• Press VSB MODE (front panel) repeat-
edly to switch the virtual surround back
channel on or off.
Note that this is only possible when you’re
listening in surround sound (
STANDARD or
ADVANCED SURROUND should be selected).
XRE3077A.En.26.30 03.12.4, 7:47 PM 28