Pioneer D514 - Manuel (Page 24)

Controls and displays 04
24
En
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO : Lights when AUTO signal select is on.
DIGITAL : Lights when a digital audio signal is
detected.
2 DIGITAL : Lights when a Dolby Digital signal
is detected.
ANALOG : Lights when an analog signal is
detected.
DTS : Lights when a source with DTS audio
signal is detected.
SB : Lights when a source (such as DTS-ES and
Dolby Digital EX) with surround back channel
information is detected.
2
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Prologic II decoding.
5 VIR.SB
Lights during Virtual surround back processing.
6 DIRECT
Lights when source direct playback is selected.
Direct playback bypasses the tone controls and
channel levels for the most accurate reproduc-
tion of a source.
7 MIDNIGHT
Lights during Midnight listening.
8 SLEEP
Lights when the receiver is in sleep mode.
9 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the input signal (can only
be used with an analog signal).
10 Speaker indicator
Shows if the speaker system is on or not.
SP
3A means speakers are switched on. SP 3
means the headphones are connected.
1 2 3 4 5 6 7 8 9 10
11 15 13 12 14
Display
XRE3077A.En.20.25 03.12.4, 7:47 PM 24