Fading in and fading out – Sony MDS-JA333ES Manuel d'utilisation

Page 40

Advertising
background image

40

GB

Changing the pitch/Fading in and fading out

O

the
r Func

tions

1

While the deck is playing, press MENU/NO twice.

“Setup Menu” appears in the display.

2

Turn AMS (or press

.

/

>

repeatedly) until

“Pfine” appears, then press AMS or YES.

3

Turn AMS (or press

.

/

>

repeatedly) until the

desired value appears, then press AMS or YES.

4

Press MENU/NO.

To recall the factory setting

Press CLEAR while setting the value.

Notes

The playing sound drops out momentarily when you change
the fine control value.

The fine control value reverts to “0.0%” (factory setting) when
you turn off the deck or eject the MD.

The step and fine control values are linked; changing one value
also changes the other.

Fading in and fading out

You can use Fade-in Play to gradually increase the signal
level to the ANALOG OUT jacks and the PHONES jack
at the start of playing. Fade-out Play gradually decreases
the signal level at the end of playing.
Fade-in Recording gradually increases the signal level at
the start of recording. Fade-out Recording gradually
decreases the signal level at the end of recording.

Note

The level of the signal output from the DIGITAL OUT connector
does not change during Fade-in Play nor Fade-out Play.

During play pause (for Fade-in Play) or recording
pause (for Fade-in Recording), press FADER.

b flashes in the display and the deck performs Fade-in
Play or Fade-in Recording for five seconds (factory
setting) until the counter reaches “0.0s.”

During play (for Fade-out Play) or recording (for Fade-
out Recording), press FADER.

B flashes in the display and the deck performs Fade-out
Play or Fade-out Recording for five seconds (factory
setting) until the counter reaches “0.0s,” then pauses.

Fade-in Play and Fade-in Recording

Fade-out Play and Fade-out Recording

Z

FADER

>

.

X

H

X

` / 1

Z

x

.

>

m

M

Advertising