Sony MDS-JA333ES - Manuel (Page 11)

11 GB
Hooking up the audio components
Gettin
g
Sta
rted
Hooking up the audio components
A Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
B
Optical cables (3) (not supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
C
Coaxial digital connecting cables (2) (not supplied)
• Turn off the power of all components before making any
connections.
• Do not connect any AC power cord until all the
connections are completed.
• Be sure the connections are firm to prevent hum and
noise.
A C B
D
CONTROL A1
ΙΙ
AC power cord
1) Digital equipment with a DIGITAL OUT connector only
2) Digital equipment with both DIGITAL IN and OUT connectors
Amplifier, etc. CD player, DBS tuner, etc. 1) , Digital
amplifier, DAT deck, MD deck, etc. 2)
to a wall outlet
Required cords
White (L)
Red (R)
White (L)
Red (R)
Hookup considerations
Jacks (connectors) for connecting audio
components
Connect To the
Amplifiers ANALOG IN/OUT jacks
CD players or DBS tuners DIGITAL IN connector
Digital amplifiers, DAT decks,
or another MD deck
DIGITAL IN/OUT connectors