Naming a track or md, Name), Naming a track or md (name) 35 – Sony MDS-JA333ES Manuel d'utilisation

Page 35: N (35)

Advertising
background image

35

GB

Naming a track or MD

Editin

g Rec

o

rd

ed

MDs

Naming a track or MD

(NAME)

You can enter a name for a recorded MD as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers, and symbols. A total number
of about 1,700 characters can be stored for all the names
on the MD.

Note

If you name a track while it is being recorded, be sure to finish
the naming operation before the track ends. If the track ends
before you finish, the entered character data will be discarded
and the track will remain unnamed. Also, you cannot name
tracks while the deck is recording over existing material.

1

Press MENU/NO while the deck is in one of the
operating modes listed below, depending on what
you want to name:

“Edit Menu” appears in the display.
To enter a name while the deck is recording, go to step
3.

2

Turn AMS until “Name ?” appears, then press AMS
or YES.

3

Turn AMS until “Nm In ?” appears, then press AMS
or YES.

While the deck is recording, a flashing cursor appears
in the display and you can enter a name for the track
being recorded. In this case, go to step 5.

4

Turn AMS until the track number (when naming a
track) or “Disc” (when naming the MD) flashes,
then press AMS or YES.

A flashing cursor appears.
The deck starts playing and you can name a track
while monitoring the sound.

5

Press DISPLAY/CHAR repeatedly to select the
character type.

To enter a space

Press

M while the cursor is flashing. You cannot

enter a space as the first character.

6

Turn AMS to select the character.

The selected character flashes.

To change a selected character

Repeat steps 5 and 6.

7

Press AMS.

The selected character is entered and lights
continuously. The cursor shifts to the right, flashes,
and waits for the input of the next character.

8

Repeat steps 5 to 7 to enter the rest of the name.

To change a character

Press

m/M repeatedly until the character to be

changed flashes, then repeat steps 5 to 7.

Naming a track or an MD using the
controls on the deck

To name

Press while the deck is

A track or the MD

Stopped, playing, or paused

The track being recorded

Recording the track

AMS

MENU/NO

CLEAR

YES

m

/M

DISPLAY/CHAR

m/M

CLEAR

./>

CHAR

NAME

NUM

>

.

X

H

X

` / 1

Z

x

z

.

>

m

M

Letter/number
buttons

To select

Press repeatedly until

Uppercase letters

“A” appears in the display

Lowercase letters

“a” appears in the display

Numbers

“0” appears in the display

Symbols

1)

1) You can use the following symbols in titles:

’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ * `

” appears in the display

Advertising