JVC GR-D850UC Manuel d'utilisation

Page 41

Advertising
background image

EN

41

Connections/Editing

ENGLISH

1

2

6

3

4

Dubbing To Or From A Video

Unit Equipped With A DV

Connector (Digital Dubbing)

It is also possible to copy recorded scenes
from the camcorder onto another video unit
equipped with a DV connector. Since a digital
signal is sent, there is little, if any, image or
sound deterioration.

To use this camcorder as a player

1

Make sure all units are turned off.

2

2

Connect this camcorder to a video unit

equipped with a DV input connector using
a DV cable as shown in the illustration.

3

Start playback on the camcorder (

੬ 21).

4

4

At the point you want to start dubbing, start

recording on the video unit. (Refer to the
video unit’s instruction manual.)

5

5

To stop dubbing, stop recording on the

video unit, then stop playback on this
camcorder.

Notes:
• It is recommended to use the AC Adapter

as the power supply instead of the battery
pack (

16).

• If a blank portion or disturbed image is played

back on the player during dubbing, the dubbing
may stop so that an unusual image is not
dubbed.

• Even though the DV cable is connected

correctly, sometimes the image may not
appear in step

4

4

. If this occurs, turn off the

power and make connections again.

• If

SNAPSHOT is pressed during playback, only

the original playback image recorded on the
tape is output from the DV IN/OUT connector.

• When using a DV cable, be sure to use the

optional JVC VC-VDV204U or VC-VDV206U
DV cable.

To use this camcorder as a recorder

1

Make sure all units are turned off.

2

2

Connect this camcorder to a video unit

equipped with a DV output connector using
a DV cable as shown in the illustration.

3

Set the camcorder’s Power Switch to “PLAY”.

4

Set “REC MODE” to “SP” or “LP” (

੬ 30).

5

Start playback on the player.

6

6

Press the Recording Start/Stop Button to

engage the Record-Pause mode.

• The

” indication appears on the

screen.

7

7

At the point you want to start dubbing,

press the Recording Start/Stop Button to
start dubbing. The T indication rotates.

8

8

Press the Recording Start/Stop Button

again to stop dubbing. The T indication
stops rotating.

9

9

Press

8 to return to the normal playback

mode.

Note:
Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current “SOUND MODE” setting (

੬ 30).

To DV IN/OUT

DV cable (optional)

Core fi lter

Video unit equipped with DV connector

COPY PROTECTED

Appears if dubbing of copyguarded signals is
attempted while this camcorder is being used
as a recorder.

To DV IN/OUT

Core fi lter

To DV OUT

GR-D850&870UC_EN.indb 41

GR-D850&870UC_EN.indb 41

11/15/2007 2:15:22 PM

11/15/2007 2:15:22 PM

Advertising