JVC GR-D850UC - Manuel (Page 40)

40
EN Connections/Editing
1 2 3
Connections To A TV Or VCR
1 Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
2 Red to AUDIO R IN*
3 White to AUDIO L IN*
* Not required for watching still images only.
1
Make sure all units are turned off.
2 2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step
3 3 .
If not, go to step 4 4 .
3 3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4 4
Turn on the camcorder, the VCR and the
TV.
5 5
Set the VCR to its AUX input mode, and
set the TV to its VIDEO mode.
6 6
Start playback on the camcorder (
੬ 21).
• Please set “WIDE TV” of Playback Menus
so that the image may suit your TV (16:9
TV or 4:3 TV) (
੬ 28, 31).
To AV connector
or
Audio/Video cable
(provided)
VCR
TV
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set “DATE/TIME” to “ON”, “AUTO” or “OFF”
(
੬ 31).
• Time Code
Set “TIME CODE” to “ON” or “OFF” (
੬ 31).
• On Screen
Set “ON SCREEN” to “OFF”, “LCD” or
“LCD/TV” (
੬ 31).
Notes:
• It is recommended to use the AC Adapter
as the power supply instead of the battery
pack. (
੬ 16)
• To monitor the picture and sound from
the camcorder without inserting a tape or
memory card, set the camcorder’s
Power Switch to “REC”, then set your TV to the
appropriate input mode.
• Make sure you adjust the TV sound volume to
its minimum level to avoid a sudden burst of
Dubbing To A VCR
To use this camcorder as a player
1 1
Following the illustration,
੬ 40,
“Connections To A TV Or VCR”, connect
the camcorder and the VCR’s input
connectors.
2 2
Perform steps 1 – 6 6 , “Connections To A
TV Or VCR”. (
੬ 40)
3 3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4 4
To stop dubbing, stop recording on
the VCR, then stop playback on the
camcorder.
2
4
5
GR-D850&870UC_EN.indb 40 GR-D850&870UC_EN.indb 40 11/15/2007 2:15:21 PM 11/15/2007 2:15:21 PM