Features for recording, Led light, Live slow – JVC GR-D850UC Manuel d'utilisation

Page 34: Snapshot (record still image on tape), Motor drive mode

Advertising
background image

34

EN

Features For Recording

LED Light

LED Light can be used to brighten the subject
in the dark place during video recording or

D.S.C. shooting.

Press LIGHT repeatedly to change the setting.

The light is on always.

The light turns on automatically
when dark.

No display Disables this function.

Notes:
• Be careful not to point the LED Light directly to

eyes.

• If the light does not reach the subject when

the LED Light setting is “ON”, the Night-
Alive function will be activated, and makes it
possible to shoot the subject brighter.

• Since subjects are shot at a reduced shutter

speed when the LED Light setting is “ON”, they
will appear slightly blurred.

Snapshot (Record Still Image

On Tape)

This feature lets you record still images that
look like photographs onto a tape.

1

1

Set the MEMORY/VIDEO

Switch to “VIDEO” (

੬ 13).

2

Set the Power Switch to “REC” (

੬ 13).

3

3

Set “REC MEDIA” to “

/

” or “

” (

੬ 30).

4

4

Set “SNAP/SLOW” to “SNAP”.

(

੬ 30)

5

5

Press

SNAPSHOT.

Notes:
• The

PHOTO” indication appears and a still

image will be recorded for approx. 5 seconds,
then the camcorder re-enters the Record-
Standby mode.

• You can perform Snapshot also during recording.

A still image will be recorded for approx.
5 seconds, then the normal recording resumes.

• If the image taken by snapshot is too dark or

too bright, select

(

੬ 36) or “SPOTLIGHT”

(

੬ 38).

The image quality for Snapshot in

16:9 modo is 640 x 360. However, the approx.
number of storable images is similar with
Snapshot in 4:3 mode (

੬ 23).

Motor Drive Mode

Keeping SNAPSHOT pressed in step

5

5

provides an effect similar to serial photography.
(Interval between still images: approx. 1 second).

The Motor Drive mode is disabled

when “REC MEDIA” is set to

/

or

” (

੬ 30).

LED Light

LIGHT

Live Slow

This feature is useful for recording or playing
back precious or hard-to-see moments at a
slow speed. Sound is recorded and played
back in real time.

1

1

Set

the

MEMORY/VIDEO Switch to

VIDEO”.

2

2

Set the Power Switch to “REC” or “PLAY”.

• If set to “REC”, the recording mode should

be set to “M” (

੬ 20).

3

3

Set “SNAP/SLOW” to “SLOW” (

੬ 30, 33).

The Live Slow indicator “

” appears.

4

4

Press

SLOW during recording or playback.

• The moving pictures are divided into four

frames. They are recorded or played
back for 1.5 seconds, and then normal
recording or playback resumes.

Note:
Live Slow cannot be used when the 16:9 Wide
mode is selected.

2

3

4

5

GR-D850&870UC_EN.indb 34

GR-D850&870UC_EN.indb 34

11/15/2007 2:15:15 PM

11/15/2007 2:15:15 PM

Advertising