DE DIETRICH 6355DNX - Manuel (Page 44)

44
Initialisation
Starting up and choosing the language
Hold down the selector knob for a few sec-
onds.
- 2 temperatures appear on the screen.
- A text scrolls, inviting you to select the lan-
guage immediately: CHOOSE THE LANGUAGE
- CHOISISSEZ VOTRE LANGUE - SCEGLI LA
LINGUA…
Turn the knob to the right and select the de-
sired language by pressing the knob.
- A confirmatory beep sounds.
- A welcome message in the selected language
scrolls once,
- Then a message inviting you to set the time
appears on your screen.
Setting the time and the date
Once you have set the language and immedi-
ately after the welcome message, a text scrolls
on your screen inviting you to set the time:
Press the knob
- You hear a confirmatory beep
- The hours start to flash on the screen.
You can set the time by turning the control
knob and then pressing it to confirm.
Repeat the operation for the minutes
- A message now invites you to set the date Set the day, the month and the year desired in
the same way as for the hours and the min-
utes.
- The selected date is shown in its integrity fol-
lowed by "OK" flashing and by "NO"
- To confirm your setting, press the knob
- To change it, turn the knob until "NO" flashes
and press the knob. You can also change the
date again.
Setting the temperatures
When you put your appliance into operation,
set the refrigerator temperature to a moderate
setting (5°C on the refrigerator compartment
and -18°C on the freezer compartment).
4 hours after starting your appliance or after
any change in the setting for the refrigerator
temperature, check the temperature OK indi-
cator on your screen (see Symbols table).
- If the indicator does not appear, gradually
lower the temperature and check the indicator
again 4 hours later.
Repeat the operation as often as necessary.
If the OK indicator appears on your screen,
your refrigerator's temperature is correctly set.
Starting up and adjusting the appliance EN