Maintenance – Polaris 2005 Victory Hammer - Canada Manuel d'utilisation

Page 105

Advertising
background image

101

MAINTENANCE

Fuel System

Fuel can damage painted surfaces and plastic parts. Wipe spilled fuel immediately from the motorcycle
using a clean, dry, soft cloth.

Caution

5. Loosen hose clamp and disconnect the fuel supply hose from fuel

rail (2).

6. At the rear left side of the tank, disconnect the tank vent hose

(California models) and the water drain hose.

7. Carefully remove fuel tank.
8. To reinstall the fuel tank, reverse the removal steps, routing fuel

supply hose to the right of breather hose.

9. Torque the fuel supply hose clamp.

Torque: 20 in-lb. (2.5 Nm)

10. Reinstall the fuel tank mounting screws.

Torque: 35 ft-lb. (47.5 Nm)

11. Reinstall the seat.

Replace Fuel Filter

The fuel filters are attached to the electric fuel pump located inside the fuel tank. Fuel filter condition is associated

with engine performance and fuel economy. For fuel filter replacement procedures and special tools required, see

the VICTORY Service Manual or contact an authorized VICTORY dealer.

2

Advertising