Maytag MHWZ600WR - Manuel (Page 17)

17
3. Push in the dispenser drawer slowly and completely (to avoid a spill).
DETERGENT LIQUID BLEACH
SOFTENER
MAX
A
B
C
D
MAX
Dispenser
A. Dispenser release lever
B. Main Wash detergent compartment
C. Liquid chlorine bleach compartment
D. Fabric softener compartment
Main Wash detergent compartment
(Letter B in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for your main wash cycle.
„ Powdered color-safe bleach may be added to the Main Wash compartment along with the
powdered detergent.
„ Use the measurement device which comes with the detergent. Add no more than the
manufacturer’s recommended amount.
NOTE: Overfilling could cause an oversudsing condition.
Chlorine bleach compartment
(Letter C in Dispenser Illustration)
Add NO MORE THAN
2 / 3 cup (160 mL) liquid chlorine bleach to this compartment. The
bleach will be automatically diluted and dispensed at the best time during the first rinse after
the wash cycle. This compartment cannot dilute powdered bleach.
„ Use only liquid chlorine bleach in this dispenser. Do not use this dispenser to add
powdered chlorine or any form of color-safe bleach to your load.
„ Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not
guess. Follow the manufacturer’s directions for proper use.
„ Do not fill beyond the “MAX” level.
NOTE: Overfilling could cause garment damage.
Fabric softener compartment
(Letter D in Dispenser Illustration)
Add ¼ cup (60 mL) liquid fabric softener to this compartment. Fabric softener will be
automatically dispensed in the final rinse or in the EXTRA RINSE, if selected.
„ Do not fill beyond the “MAX” level.
Pausing or Restarting
1. To pause the washer at any time, select PAUSE/CANCEL.
2. To continue the cycle, select and hold START (for approximately 1 second).
Changing Cycles, Options, and Modifiers
Not all Options and Modifiers are available with all Cycles.
Cycles, Options, and Modifiers can be changed anytime before START is selected.
To stop a cycle and select a new cycle
1. Select PAUSE/CANCEL twice.
2. Select POWER.
3. Select desired cycle.
4. Select the desired OPTIONS such as Prewash, MAX EXTRACT™, Stain Cycle, or Extra
Rinse.
5. Select the desired MODIFIERS such as Spin Speed or Wash/Rinse Temp.
6. Select and hold START (for approximately 1 second) to restart the washer at the beginning
of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can be removed.
NOTE: If the water level or the temperature is too high, the washer will drain automatically
before the door unlocks.
To change Options or Modifiers after the cycle has started
1. Select PAUSE/CANCEL.
2. Select the desired Spin Speed, Wash/Rinse Temp, or OPTION (such as Prewash, MAX
EXTRACT™, Stain Cycle, or Extra Rinse). If the modifier or option are not available, the
machine will beep.
3. Select and hold START (for approximately 1 second) to continue the cycle.
To drain the washer manually
1. Select PAUSE/CANCEL.
2. Select SPIN Only.
3. Select and hold START (for approximately 1 second) to begin the drain.
4. When the spin is complete, the door unlocks. Items can be removed from the washer.