Napoleon Fireplaces GDI44 - Manuel (Page 11)

11
W415-0734 / D / 02.03.12
4.0 FINISHING
The minimum fi replace opening size in which the appliance is to be installed is:
HEIGHT 21 inches WIDTH 32 inches DEPTH 16 inches
The minimum allowable chimney fl ue size is 7" round.
The minimum distance, from the bottom of a combustible mantle projecting 3" maximum from the wall to the
top of the aluminium trim, is 12". A hearth must protrude a minimum of 12" from the appliance.
4.1 MINIMUM MANTEL CLEARANCE
This can vary according to the mantle depth. Use the graph to help evaluate the clearance needed.
0
4
14
3 5
+
(
,
*
+
7
0
$
1
7
(
/
MANTEL DEPTH
13
12
15
6
12”
15”
14”
13”
6” MANTEL
5”
3”
4”
!
WARNING
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
CLEARLY MAINTAINED.
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
HEAT RESISTANT TO PREVENT DISCOLOURATION.
73.1